Ahmed, B. and Nethercot, D. A. (1995) "Numerical modelling of composite flush endplate connections", Journal of Singapore Structural Steel Society, Singapore, Vol. 6, No.1, pp. 87-102.

Ahmed, B. and Nethercot, D. A. (1996) "Effect of high shear on the moment capacity of composite cruciform endplate connections", Journal of Constructional Steel Research, UK, Vol. 40, No. 2, pp. 129-163.

Ahmed, B. and Nethercot, D. A. (1997) "Design of flush endplate connections in composite beams", The Structural Engineer, Journal of the Institution of the Structural Engineers, Part A Design and Construction, 1997, UK, Vol. 75, No. 15, pp. 233-244. Received "Henry Adams Diploma" by "The Institution of the Structural Engineers" as the best research paper during session 1996-97.

Ahmed, B., Li, T. Q. and Nethercot, D. A. (1997) "Design of composite finplate and angle cleated connections", Journal of Constructional Steel Research, UK, Vol. 41, No. 1, pp. 1-29.

Ahmed, B. and Nethercot, D. A. (1997) "Prediction of initial stiffness and available rotation capacity of major axis composite flush endplate connections", Journal of Constructional Steel Research Vol. 41, UK, No. 1, pp. 30-60.

Nethercot, D. A., Li, T. Q., and Ahmed, B. (1998) "Plasticity of composite beams at serviceability limit state", The Structural Engineer, Journal of the Institution of the Structural Engineers, UK, Vol. 76, No. 15, pp. 289-293.

Nethercot, D. A., Li, T. Q., and Ahmed, B. (1998) "Unified classification system for beam-to-column connections", Journal of Constructional steel Research, UK, Vol. 45, No. 1, pp. 39-65.

Ahmed, B. and Nethercot, D. A. (1998) "Effect of column axial load on composite connection behavior", Engineering Structures, UK, Vol. 20, No. 1-2, pp. 113-128.

Ahmed, B. and Chowdhury, S. R. (1999) "Simplified calculation method for serviceability deflection of edge supported slabs; Part 1: Modelling Slab Response" Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh, Vol. CE 27, No. 1, June 1999, pp. 29-40. Awarded "Best Paper 2000" award by "The Institution of Engineers, Bangladesh".

Ahmed, B. and Chowdhury, S. R. (1999) "Simplified calculation method for serviceability deflection of edge supported slabs; Part 2: Coefficient method" Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh, Vol. CE 27, No. 1, June 1999, pp. 41-57. Awarded "Best Paper 2000" award by "The Institution of Engineers, Bangladesh".

Ahmed, B. (2001) "Deflection of semi-rigidly connected beams", Journal of the Institution of Engineers, Bangladesh, Vol. CE 29, No. 2, December 2001, pp. 133-150.

Ahmed, B., Amanat, K. M., Safiullah, A. M. M. and Chowdhury, J. R. (2002) "Causes of cracking of culverts on filled soil and their performance after repair", Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh, Vol. CE 30, No. 1, June 2002, pp.1-12. Awarded "Best Paper 2003" award by "The Institution of Engineers, Bangladesh".

Ahmed, B. and Chowdhury, S. R. (2002) "Coefficient method of Analysis for Octagonal Slabs" Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh, Vol. CE 30, No. 2, December 2002, pp. 111-122.

Ahsan, R., Ahmed, I., and Ahmed, B. (2003) "Lateral Drift of Semi-Rigid Steel Frames-I", Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh. Vol. CE31, No.2, December 2003 pp.177-189.

Ahsan, R., Ahmed, I., and Ahmed, B. (2003) "Lateral Drift of Semi-Rigid Steel Frames-II", Journal of the Civil Engineering Division, The Institution of Engineers, Bangladesh. Vol. CE31, No.2, December 2003 pp.191-203.

Ashraf, M., Nethercot, D. A., and Ahmed, B. (2004) "A Simplified Method to Predict Sway of Rigid Multi-Story Steel Frames", Steel and Composite Structures, Vol. 4, No. 4(2004), Korea, pp. 317-331, ISSN: 1229-9367.

Ashraf, M., Nethercot, D. A., and Ahmed, B. (2004) "Sway of semi-rigid steel frames, Part 1: regular frames", Engineering Structures, Vol. 26, Issue 12, October 2004, UK, pp 1809-1819, ISSN: 0141-0296.

Ashraf, M., Nethercot, D. A., and Ahmed, B. (2007) "Sway of semi-rigid steel Frames, Part 2: Irregular frames" ", Engineering Structures, Vol. 29, UK, pp 1854-1863.

Ashraf, M., Nethercot, D. A., and Ahmed, B. "Effect of base flexibility on sway of semi-rigid steel frames in preparation.

Ashraf, M., Nethercot, D. A., and Ahmed, B. "A simplified method to estimate sway of semi-rigid steel frames" in preparation.

Conference papers

Ahmed, B., Li, T. Q. and Nethercot, D. A. (1995) "Modelling Composite Connection Response", Connections in Steel Structures: Behavior, strength & design, Edited by Reidar Bjorhovde, Andre Colson, Riccardo Zandonini, Proceedings of the Third International Workshop, Trento University, Italy, 29-31 May, pp.259-268.

Nethercot, D. A. and Ahmed, B. (1996) "Numerical modelling of composite connections and composite frames", Composite Construction in Steel and Concrete III, proceedings of an (ASCE) engineering foundation conference, Swabian conference center, Irsee, Germany, 9-14 June, edited by C Dale Buckner and Bahram M. Shahrooz, pp.809-822.

Nethercot, D. A., Ahmed, B., Li, T. Q. and Xiao, Y. (1996) "Design Procedures for Composite Connections", Composite Construction in Steel and Concrete III, proceedings of an (ASCE) engineering foundation conference, Swabian conference center, Irsee, Germany, 9-14 June, edited by C Dale Buckner and Bahram M. Shahrooz, pp.794-808.

Ahmed, B. and Nethercot, D. A. (1996) "Parallel use of large-scale testing and numerical simulation", Structural Assessment: the Role of Large and Full Scale Testing, Institution of Structural Engineers Conference, City University, London, 1-3 July, edited by K. S. Virdy, F. K. Garas, J. L. Clarke and G.S.T. Armer, pp.15-24.

Seraj, S. M. and Ahmed, B. (1997) "Interaction of retaining walls with soils", International Symposium on Deformation and Progressive Failure in Geomechanics, 5-7 October, Nagoya, Japan, edited by Akira Asaoka, Toshihisa Adachi and Fusao Oka, pp.683-688.

Ahmed, B. and Nethercot, D. A. (1998) "Overall behavior of composite connections", FESTSCHRIFT, J. Linder, Proceedings of conference held in the Technical University of Berlin, Germany, pp. 321-328.

Ahmed, B., Amanat K. M., Ashraf M., Hoque E. (1999) "Deflection of semi-rigidly connected beams subjected to center point loading", Civil and Environmental engineering conference-New frontiers and challenges, 8-12 November 1999, AIT, Bangkok, Thailand, pp. II-113-122.

Amanat K. M., Ahmed, B., Hoq E. and Enam M. B. (1999) "Computational investigation of the semi-rigid properties of reinforced concrete beam-column joint", Civil and Environmental engineering conference-New frontiers and challenges, 8-12 November 1999, AIT, Bangkok, Thailand, pp. II-37-44.

Ahmed, B. and Nethercot, D. A., (2000) "Sway in unbraced steel frames" retirement volume of Professor Bode of the University of Kaiserlautern in Germany on September 2000, Festschrift Bode, pp. 411-433.

Ashraf, M. and Ahmed, B. (2001) "Estimation of Sway of Semi-Rigid Regular Steel Frames Using Equation" Proceedings of the First Annual Paper Meet and International Conference on Civil Engineering, 2 - 3 November 2001, edited by Seraj. S. M., Ali. M. A. and Ahmed, B. pp. 86-92.

Ashraf, M. and Ahmed, B. (2001) "Graphical Method to Calculate Sway of Semi-Rigid Regular Steel Frames" Proceedings of the First Annual Paper Meet and International Conference on Civil Engineering, 2 - 3 November 2001, edited by Seraj. S. M., Ali. M. A. and Ahmed, B. pp. 112-122.

Ahmed, B. and S. R. Chowdhury (2001) "Behaviour of edge supported slab with opening " Proceedings of the First Annual Paper Meet and International Conference on Civil Engineering, 2 - 3 November 2001, edited by Seraj. S. M., Ali. M. A. and Ahmed, B. pp. 160-171.

Ahsan, R., Ahmed, I. and Ahmed, B. (2003) "Secant Stiffness of Semi-Rigid Steel Frames" Proceedings of the Second Annual Paper Meet and International Conference on Civil Engineering, Bangladesh University of Engineering and Technology (BUET), edited by Seraj. S. M., Ali. M. A. and Ahmed, B. pp. 319-330.

Ahmed, B. and Chowdhury, S. R. (2003), "Estimation of serviceability deflection of edge supported slabs, Part 1: Modelling Slab Response", Proceedings of the 28th Conference on OUR WORLD IN CONCRETE & STRUCTURES, Singapore, 28 - 29 August 2003, pp.195-202.

Ahmed, B. and Chowdhury, S. R. (2003), "Estimation of serviceability deflection of edge supported slabs, Part 2: Coefficient method", Proceedings of the 28th Conference on OUR WORLD IN CONCRETE & STRUCTURES, Singapore, 28 - 29 August 2003, pp. 202-210.

Ahmed, B. and Chowdhury, S.R. (2003), "Simplified Analysis of Octagonal Slabs", Proceedings of the 28th Conference on OUR WORLD IN CONCRETE & STRUCTURES, Singapore, 28 - 29 August 2003, pp.187-194.

Ahmed, B. and Ashraf, M. (2003) "Effect of number of bay on sway of building frames", Proceedings of the Second International Conference on Structural and Construction Engineering, "System-based Vision for Strategic and Creative Design", 23-26 September 2003, Rome, Italy, pp 873-877.

Ahmed, B. and Ashraf, M. (2003) "Sway estimation of rigid frames using equation", Proceedings of the Second International Conference on Structural and Construction Engineering, "System-based Vision for Strategic and Creative Design", 23-26 September 2003, Rome, Italy, pp 907-913.